+46 732 020 059
sales@GOmeasure.se

GRAS RA0045-S1 Prepolarized Ear Simulator According to IEC 60318-4 (60711)

GRAS RA0045-S1 Prepolarized Ear Simulator According to IEC 60318-4 (60711)

0,00 kr.

The RA0045-S1 Prepolarized Ear Simulator is for making acoustic measurements on earphones coupled to the human ear by ear inserts such as tubes, ear moulds, or ear tips. The acoustic input impedance of RA0045-S1 closely resembles that of the human ear and, as a result, loads a sound source in very much the same way.

GRAS RA0045-S1 Prepolarized Ear Simulator According to IEC 60318-4 (60711)

Introduction

The RA0045-S1 Prepolarized Ear Simulator is for making acoustic measurements on earphones coupled to the human ear by ear inserts such as tubes, ear moulds, or ear tips. The acoustic input impedance of RA0045-S1 closely resembles that of the human ear and, as a result, loads a sound source in very much the same way.

The RA0045-S1 complies with the following international requirements:

  • IEC 60318-4: Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts.
  • ITU-T Recommendations P.57 (08/96) Series P: Telephone transmission quality, Objective measuringapparatus: Artificial ears.

It is measured and calibrated according to the ITU-T Recommendation P.57.

Design

The RA0045-S1 embodies a number of carefully designed volumes connected via well-defined and precisely tuned resistive grooves. In an equivalent electrical circuit, capacitors would represent the volumes, and inductance and resistance would represent respectively air mass and air flow within the resistive groves.

It is delivered with a built-in GRAS 40AO 1/2″ prepolarized pressure microphone and an individual calibration chart for the ear simulator.

Typical Applications and Use

The RA0045-S1 is for measurements on earphones and hearing aids coupled to the human ear by ear inserts such as tubes, ear moulds, or ear tips.

In accordance with ITU-T Recommendation P.57, it can be used with the following GRAS pinna simulators for testing telephones:

It is also part of the GRAS 43AC-S1 Artificial Ear.

A comprehensive range of accessories for making measurements in accordance with IEC 60318-4 are available. See the tab Ordering info.

Compatibility

The RA0045-S1 can be used with a standard CCP preamplifier, e.g. the GRAS 26CA 1/2″ Preamplifier or the GRAS 26CB 1/4″ Preamplifier fitted with an adapter. For the 1/4″ preamplifier, use either the straight RA0003 Adapter or the right-angled RA0001 Adapter.

GRAS RA0045-S1 Prepolarized Ear Simulator According to IEC 60318-4 (60711)

GRAS RA0045-S1 Prepolarized Ear Simulator According to IEC 60318-4 (60711) datasheet

Additional information

Producent

GRAS

Produktkategori

Ear & Mouth Simulators

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more