Hioki PW8001 Power Analyzer
0,00 kr.
- High Precision Power Analyzer for Motor and Inverter Efficiency Analysis
- DC
- 0.1 Hz to 5 MHz
- 3-phase 4-wire
- Max. 8 input units (start mix and match)
Hioki PW8001 Power Analyzer
The Hioki PW8001 sets a new benchmark for complete power analysis solutions with Hioki being the only manufacturer that offers industry-leading power analyzers and a wide portfolio of high-accuracy current sensors both developed and manufactured by Hioki. This enables to align their performance and results in more accurate and stable measurements from DC to high frequencies and low power factor measurements thanks to functions like the automatic phase shift correction.
Upcoming industry challenges are anticipated with the ability to measure even large currents at voltages up to 1500 V, 15 MS/s sampling rate and multi-channel measurement target applications using SiC/GaN semiconductors from automobile electrification, smart grids and reactors to renewable energy supply sources.
Basic specifications
Measurement lines | 1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire |
---|---|
No. of PW8001 input units | Max. 8 units (mix and match) |
Type of input unit | U7001 2.5 MS/s INPUT UNIT U7005 15 MS/s INPUT UNIT |
Measurement frequency band | U7001: DC, 0.1 Hz to 1 MHz U7005: DC, 0.1 Hz to 5 MHz |
Sampling | U7001: 2.5 MHz, 16-bit U7005: 15 MHz, 18-bit |
Data update rate | 10 ms, 50 ms, 200 ms |
Accuracy for power (U7001) | 50/60 Hz: 0.02% of reading + 0.05% of range DC: 0.02% of reading + 0.05% of range 50 kHz : 0.4% of reading + 0.1% of range |
Accuracy for power (U7005) | 50/60 Hz : 0.01% of reading + 0.02% of range DC : 0.02% + 0.03% of reading of range 50 kHz: 0.15% of reading + 0.05% of range |
Measurement range | Voltage: 6 V, 15 V, 30 V, 60 V, 150 V, 300 V, 600 V, 1500 V Current: (probe1) 100 mA to 2 kA, (probe2) 100 mA to 50 kA (Range configuration changes depending on the current sensor used, U7001 only for Probe2.) |
Measurement parameters | voltage (U), current (I), active power (P), apparent power (S), reactive power(Q), power factor (λ), phase angle (φ), voltage frequency(fU), current frequency(fI), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)
– Harmonics measurement: maximum analysis order 500th |
Calculation function | Efficiency and loss calculations, User-defined calculations*, Delta conversion, Current sensor automatic phase shift calculation |
External interface | USB flash drive, LAN, GP-IB, RS-232C, external control, optical link*, BNC sync.*, CAN or CAN FD* |
Power supply | 100 V to 240 V AC, 50/60 Hz, 230 VA |
Dimensions and mass | Approx. 430 mm (16.93 in) W × 221 mm (8.70 in) H × 361mm (14.21 in) D, Approx. 14kg (493.84 oz) |
Included accessories | – Power cord ×1 – Instruction Manual ×1 – GENNECT One (PC applications) CD ×1 – D-sub 25-pin connector ×1 (PW8001-02, -05, -12, -15 only) |
- *To be supported in Ver. 2.00
For more information: Hioki
Hioki PW8001 Power Analyzer
Hioki PW8001 Power Analyzer
Model No. (Order Code)
PW8001-01 | |
---|---|
PW8001-02 | D/A output |
PW8001-03 | *Scheduled Release Date: CAN or CAN FD output |
PW8001-04 | *Scheduled Release Date: Optical link interface |
PW8001-05 | *Scheduled Release Date: D/A output, optical link interface |
PW8001-06 | *Scheduled Release Date: CAN or CAN FD output, optical link interface |
PW8001-11 | Motor analysis |
PW8001-12 | Motor analysis, D/A output |
PW8001-13 | *Scheduled Release Date: Motor analysis, CAN or CAN FD output |
PW8001-14 | *Scheduled Release Date: Motor analysis, optical link interface |
PW8001-15 | *Scheduled Release Date: Motor analysis, D/A output, optical link interface |
PW8001-16 | *Scheduled Release Date: Motor analysis, CAN or CAN FD output, optical link interface |
Hioki PW8001 Power Analyzer
Power Analyzer PW8001
Additional information
Producent | Hioki |
---|---|
Produktkategori | Power Analyzer |