+46 732 020 059

GRAS 46BG-FV 1/4″ CCP Pressure Front Vented Microphone Set, High Pressure

GRAS 46BG-FV 1/4″ CCP Pressure Front Vented Microphone Set, High Pressure

0,00 kr.

  • Freq range: 3.15 Hz to 70 kHz
  • Dyn range: 60 dB(A) to 184 dB
  • Sensitivity: 0.25 mV/Pa

GRAS 46BG-FV 1/4″ CCP Pressure Front Vented Microphone Set, High Pressure


THE GRAS 46BG-FV is a front-vented version of the GRAS 46BG 1/4″ CCP Pressure Standard Microphone Set, High Pressure. Apart from the venting, these microphone sets are identical.


The 46BG is a pressure microphone set and as such optimized for acoustic measurements of the sound source in a closed coupler or the measurement of sound pressure at a boundary or wall; in which case the microphone forms part of the wall and measures the sound pressure on the wall itself.

Two front-vented versions are available, the 46BG-FV 1/4″ CCP Pressure Microphone Set, High Pressure, Front Vented and 46BG-FV-HT 1/4″ CCP Pressure Microphone Set, High Temp, Front Vented.


The GRAS 46BG is a high-performance standard microphone set. In our clean-room environment the set is assembled and sealed with a label. However, the microphone set can be dismounted, if you wish to use the components separately.

The microphone cartridge is the high-quality IEC  61094 WS3P standardized GRAS 40BG 1/4″ Prepolarized Pressure Microphone, designed for long-term reliability in multiple environments.

The preamplifier is the GRAS 26CB Preamplifier which is inclusive TEDS and based on our well-known circuit board substrates. In the industry these are famous for their low self-noise, wide frequency and excellent slew rate performance.


To perform as specified the GRAS 46BG microphone set requires a constant current input module that can deliver 4 mA and 24 V unloaded CCP voltage supply. If the constant current supply is lower, the capability of driving long cables is reduced and consequently the upper frequency is reduced. If the voltage supply is lower it will influence the upper dynamic range.

The microphone set is terminated with a 10/32 Microdot female connector. Ready to use coax cable assemblies of various types and lengths are available in standard as well as customized lengths.

The 46BG is IEEE 1451.4 TEDS v. 1.0 compliant. If your measurement platform supports Transducer Electronic Data Sheets you will be able to read and write data like properties and calibration data.


When leaving the factory, all GRAS microphones have been calibrated in a controlled laboratory environment using traceable calibration equipment. Depending on the use, measurement environment and internal quality control programs we recommend that the microphone is recalibrated at least once a year.

We offer two kinds of calibration as an optional after-sales service: GRAS Traceable Calibration and GRAS Accredited Calibration.

GRAS Traceable Calibration is a traceable calibration performed by trained personnel under controlled conditions according to established procedures and standards. This is identical to the rigorous calibration that all GRAS microphones are subjected to as an integral part of our quality assurance.

GRAS Accredited Calibration is performed by the GRAS Accredited Calibration Laboratory that has been accredited in accordance with ISO 17025 by DANAK, the Danish Accreditation Fund.

If you want a new microphone set delivered with an accredited calibration in stead of the default factory calibration, specify this when ordering.

Learn more at gras/calib.

Quality and warranty

All GRAS microphones are made of high-quality materials that will ensure life-long stability and robustness. The microphones are all assembled in verified clean-room environments by skilled and dedicated operators with many years of expertise in this field.

The microphone diaphragm, body, and improved protection grid are made of high-grade stainless steel, which makes the microphone resistant to physical damage, as well as corrosion caused by aggressive air or gasses.

This, combined with the reinforced gold-plated microphone terminal which guarantees a highly reliable connection, enables GRAS to offer 5 years warranty against defective materials and workmanship.


If you accidentally damage the diaphragm on a GRAS microphone, we can — in most cases — replace it at a very reasonable cost and with a short turn-around time. This not only protects your investment, but also pleases your quality assurance department because you don’t have to worry about new serial numbers, etc.


For more information: GRAS

Click here for related products: Measurement Microphone Sets





GRAS 46BG-FV 1/4″ CCP Pressure Front Vented Microphone Set, High Pressure


GRAS 46BG-FV Datasheet






Additional information




Measurement Microphones



This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more