+46 732 020 059
sales@GOmeasure.se

Wavecontrol WaveMon LF-400 LF Personal Monitor

Wavecontrol WaveMon LF-400 LF Personal Monitor

0,00 kr.

  • OVEREXPOSURE WARNING
    – Audible, visual and vibration alarm
  • ICNIRP, 2013/35/EU, FCC AND SC6 (2015)
    – Weighted response to any standard
  • EXPOSIMETER WITH DATALOGGER
    – USB downloading and configuration
  • HARNESS, BELT OR ARM HOLDER
    – Professional and convenient

Wavecontrol WaveMon LF-400 LF Personal Monitor

STATIC FIELD DETECTION

0 Hz – Isotropic hall effect sensor

LOW FREQUENCY DETECTION

10 Hz to 400 kHz – Isotropic coil-based sensor

ACCORDING TO ICNIRP GUIDELINES

For general public and occupational exposure

EXPOSIMETER WITH DATALOGGER

Data collecting and Reporting

GPS AND ALTIMETER

Geolocation of measurements

HIGH INTENSITY AUDIBLE, VISIBLE AND VIBRATORY ALARM

With user definable trigger threshold

USB COMMUNICATION PORT

Data downloading, set-up and battery charging

PUBLIC AND OCCUPATIONAL LIMITS

The Wavecontrol WaveMon LF-400 is an exposimeter that warns the user of a high level of exposure to low frequency magnetic fields.

Warnings are given as a percentage of exposure to a defined limit of a specific standard. It can work with general public or occupational limits.

The following exposimeters are now available:

  • WaveMon LF-400 ICN → For the ICNIRP guidelines
  • WaveMon LF-400 EUD → For the European EMF Directive 2013/35/EU
  • WaveMon LF-400 IEEE → For the IEEE standards

Wavecontrol Wavemon LF-400

DATALOGGER

The Wavecontrol WaveMon LF-400 is a low frequency exposimeter that has a datalogger for continuous data recording.

Communication with the device is through a USB port that allows you to configure the device and download the recorded data. This makes it easy to create reports and allows you to keep a record of your exposure data for your safety.

Wavecontrol Wavemon LF-400

CONVENIENCE AND SECURITY

We have created an accessory that allows you to attach the personal monitor to your harness, arm or belt and so take it in hand to hold it near a radiation source and then put it back in place easily.

You can also secure it with a small carabiner so that it won’t be dropped.

Wavecontrol Wavemon LF-400

BATTERIES

The device is small and lightweight and works with AA batteries that can be recharged via the USB port. It can also use standard AA batteries, so that they can always be easily replaced.

Easy, isn’t it? Because we want you always to be protected.

GPS AND ALTIMETER

The WaveMon is the only personal monitor equipped with a GPS and Altimeter for geolocation of measurements.

As an example, in a high voltage tower, the GPS will provide the geographical position of the tower and the Altimeter the relative height from the ground.

Wavecontrol Wavemon LF-400

USER-CONFIGURABLE ALARMS

Over-exposure alarms can be configured from a PC using the USB connection.
Two different alarms can be programmed and personalised separately for each of the standards: General Public and Occupational.
The alarm level (% of the selected limit) and the type of alarm (sound, vibration or both) can be set-up.

Wavecontrol Wavemon LF-400

 

MAIN CHARACTERISTICS OF THE WAVEMON LF-400

  • Conforms to international electromagnetic field safety standards
  • H/B-field measurements from 0 Hz to 400 kHz
  • Isotropic sensors
  • Weighted response for direct comparison with the standard limit
  • User-configurable alarms
  • High intensity audible, visible and vibration alarms
  • Customisable alarm threshold
  • Optional GPS and altimeter
  • Datalogger to report and record data
  • USB for PC connection to parameterise and download data
  • Small and lightweight
  • Powered by 2 standard disposable or rechargeable (via USB port) batteries

 

 

For more information: WaveControl

Click here for related products: RF-Safety

 

 

 

 

 

 

 

Additional information

Producent

Wavecontrol

Produktkategori

RF-Safety

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more